Factory lowest white marble price high purity whiteness 95 glossy polishing
Guangxi white marble is produced in Hezhou, Guangxi.
Guangxi white with its features of white surface, cloud like landscape texture, low price etc.
It is always the first choice for building decoration (interior wall, window, ground lines, etc.) .
"Hezhou white" calcium carbonate content is more than 99%, whiteness is greater than 95 degrees.It has the characteristics of high whiteness, good purity, mild hue, stable chemical composition, no sulfide and other harmful elements.
Construction marble is a stone which is composed of calcite, dolomite or serpentine which is capable of taking a polish.More generally in construction, specifically the dimension stone trade, the term "marble" is used for any crystalline calcitic rock (and some non-calcitic rocks) useful as building stone.
How to cut the marble tile personally?
1 Purchase or rent a large wet saw with a diamond blade.You can also use a reciprocating dry diamond blade, but you risk shattering the marble.Put on protective eyewear, hearing protection and gloves before you start cutting.
2 Ensure you have a water supply and check the water pump on the saw.Water keeps the blade from overheating, protecting the blade/saw and the marble.
3 Mark the marble with tape or china marker for your cutting guidelines.
4 Place the marble on the wet saw so most of the block is supported.Placing the marble correctly helps protect your fingers from the blade.
5 Feed the marble to the saw slowly and let the blade do the work for you.Forcing the marble into the blade can cause the marble to crack and can result in an injury.
6 Push the marble between the blade and the fence until the marble has completely cleared the blade.
7 Use a small diamond blade saw or a grinder with a diamond wheel to clean up jagged edges of the newly cut marble.Gentle movements will keep the marble from breaking.Apply dry/wet sandpaper to smooth the marble edges.You can start with an 120 grit and move upward to a 2500 grit paper. This will make the edge of your marble smooth. Do not use too coarse a grit as it may scratch the marble.
8 Clean up your work area and throw away marble scraps. Sweep up your work area well to remove small pieces of sharp marble on the floor.Ensure the wet saw has been wiped down and cooled properly before being put away or returned.
Quarry of Guangxi white marble
Guangxin white marble block:
Guangxi white marble slabs Packing:
G6802 white Bianco Marble with grey veins slabs package:
13-15Pcs slabs / bundle, 8-10 bundles / 1*20'FCL, Full loading around 500-550sqm
